컨텐츠 바로가기

  • 베스트상품
  • 1+1
  • 리퍼세일
  • 기간폰세일
  • 스마트대여
  • 견적문의
  • 상품문의
  • 무료점검신청
  • 시공사진
  • 음향기기
  • 스피커시스템
  • 앰프내장스피커/모니터스피커
  • 믹서/콘솔
  • 유선마이크
  • 무선마이크
  • 파워앰프
  • 파워드믹서
  • 플레이어 CD/DJ장비
  • 시그널프로세서
  • 랙케이스/ RACK
  • 스탠드/받침대/보면대
  • 케이블/커넥터/소모품
  • 기가폰/에펠폰
  • 행사용/충전이동식앰프
  • 홈레코딩/미디
  • 해드폰/이어폰
  • 음향기기랜탈대여
  • 유.무선마이크대여
  • 팩키지
  • 개척교회
  • 카페/라이브
  • 헬스및에어로빅
  • 동호회
  • 관공서&강당
  • 영상기기
  • 프로젝터
  • 스크린
  • 영상/기타장비
  • 베스트브랜드

현재 위치

  1. 파워앰프
  2. CROWN

이전 제품 보기

다음 제품 보기

크라운 XTi4002/CROWN XTi-4002/소비코정품/XTi 4002/크라운파워앰프 XTI 4002/교회음향전문 XTI4002 추천 (해외배송 가능상품)

기본 정보
상품명 크라운 XTi4002/CROWN XTi-4002/소비코정품/XTi 4002/크라운파워앰프 XTI 4002/교회음향전문 XTI4002
제조사 자체제작
판매가 1,450,000원
상품코드 P0000DYL
수량 수량증가수량감소
SNS 상품홍보
SNS 상품홍보

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션

(최소주문수량 1개 이상 / 최대주문수량 0개 이하)

수량을 선택해주세요.

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
크라운 XTi4002/CROWN XTi-4002/소비코정품/XTi 4002/크라운파워앰프 XTI 4002/교회음향전문 XTI4002 수량증가 수량감소 (  0)
총 상품금액(수량) : 0 (0개)
바로구매하기 장바구니 담기 SOLD OUT 관심상품등록

 

 

 

 

[제품설명]

XTi2 Series Portable PA용으로 디자인되고 만들어진 프로페셔널용 앰프로, 출력파워가 다르다는 것을 제외하고 4모델은 동일한 성능을 갖고 있습니다. XTi 1002, 2002, 4002 그리고 6002 모두 매우 튼튼하면서도 가볍고, 매우 뛰어난 성능을 갖고 있으며, 전면 판낼에 크로스 오버 주파수, EQ, Limiting, Delay 그리고 Subharmonic Synthesizer조절할 수 있는 LCD스크린이 있다.

그 밖에도 전세계적으로 통용 가능한 전원 공급스위치모드, 기능성 인디케이터, 냉각을 돕는 스피드 팬, XLR Inputs, Speakon 그리고 Binding Post 출력장치, 누전방지 등 많은 특징들을 갖고 있습니다.
게다가 당신의 XTi2에 대한 투자는 Crown3년간의 무과실 손해배상의 보증에 의해 지원됩니다.

[제품스펙]

XTi1002

XTi2002

XTi4002

XTi6002

2Ω Stereo (per ch.)

700W

1000W

1600W

3000W

4Ω Stereo (per ch.)

500W

800W

1200W

2100W

8Ω Stereo (per ch.)

275W

475W

650W

1200W

8Ω Bridge-Mono

1000W

1600W

2400W

4200W

4Ω Bridge-Mono

1400W

2000W

3200W

6000W



Input EQ

6 parametric filters per channel with adjustable Q, ±15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed.

Crossover Filters

Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes ± 15 dB bandpass gain and polarity control.

Output EQ

8 parametric filters per channel with adjustable Q, ±15 dB boost/cut. This 8-filter EQ section can be bypassed.

Delay

For signal alignment of driver; 50 mS of total delay.

SubHarmonic Synth

Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type.

Peakx™ Plus Limiter

User defeatable limiter that allows users to control Threshold, Attack, and Release times.

Presets

50 total presets, 49 of which are user-definable.



Sensitivity (for full rated power at 4 ohms)

1.4 Vrms

Frequency Response (at 1 watt, 20 Hz - 20 kHz)

+0 dB, –1 dB

Signal-to-Noise Ratio (below rated 1kHz power at 8 ohms)

XTi1002/2002/4002: 100 dB (A weighted)
XTi6002: 103 dB (A weighted)

Total Harmonic Distortion (THD)

< 0.5%

Damping Factor 20 Hz to 1 kHz

> 500

Crosstalk (below rated power)

20 kHz - 1 kHz: > 70 db

Input Impedance (nominal)

20k ohms balanced, 10k ohms unbalanced

Maximum Input Signal

+22 dBu typical

AC Line Voltage and Frequency Configurations

100 VAC, 120 VAC, 220-240 VAC 50/60 Hz

AC Line Current
(120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)

XTi1002: 6.8A; no more than 38W at idle
XTi2002: 8.3A; no more than 38W at idle
XTi4002: 10.5A; no more than 38W at idle
XTi6002: 15.3A; no more than 180W at idle

Operating Temperature

0°C to 40°C at 95% relative humidity (non-condensing)



Level

Two front-panel rotary level controls, one for each channel

Power Switch

On/Off switch applies AC power to the amplifier

Sel/Prev/Next Buttons

Three buttons near the LCD screen that are used to access menu items and front panel lockout

LCD Screen

Backlit liquid crystal display that shows preset and processing status



Signal Indicator

Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).

–10 Indicator

Green LED flashes when output signal exceeds -10 dB below clip.

–20 Indicator

Green LED flashes when output signal level exceeds -20 dB below clip.

Ready Indicator

Green LED, one per channel, illuminates when the amplifier is ready to produce audio.

Clip Indicator

Red LED, one per channel, turns on at the threshold of audible distortion

Temp Indicator

Red LED, one per channel, illuminates under excessive temperature conditions

Power Indicator

Blue LED illuminates when the amplifier has been turned on and has power



Chassis

Steel

Front Panel

Cast-aluminum

Cooling

Proportional speed fan with front-to-rear airflow.

Dimensions

XTi 1002/2002/4002: 19" (W) x 3.5" (H) x 12.25" (D)
XTi 6002: 19" (W) x 3.5" (H) x 16.2" (D)

Net Weight

XTi 1002/2002/4002: 18.5 lbs (8.4kg)
XTi 6002: 24.0 lbs (10.9kg)

Shipping Weight

XTi 1002/2002/4002: 21.5 lbs (9.8kg)
XTi 6002: 30.0 lbs (13.6kg)

 


게시물이 없습니다

상품후기쓰기 모두 보기

게시물이 없습니다

상품문의하기 모두 보기

연락주시면 자세한 상담해드립니다~